Armstrong Pumps E Series Single Phase Bronze Circulating Pump - 1/6 H.P., 120V, 2.0 Amp, 60 Hz., 3300 RPM
E.2 Series circulators are designed for use in a wide range of hydronic applications, including:
• Hot & chilled water recirculation.
• Domestic hot water generation.
• Snow-melt installations.
• Radiant heating systems.
• Geothermal heat pumps.
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
• Larger, stainless steel shaft.
• New sealed, permanently lubricated bearings.
• Bellows-style mechanical seal with silicon carbide wear surfaces.
• New water slinger to protect motor against water intrusion.
• Less flanges.
• Bronze-fitted.
• EPDM gasket.
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal.
• 30% Glass-filled Noryl impeller.
• Stainless steel face plate and shaft.
• Can be used with 3/4” to 2” flanges.
• Weights range from 11.5 to 20.1 lbs.
• Permanently lubricated stainless steel bearings.
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt.
• For California Residents please see Prop 65 Warnings
• Hot & chilled water recirculation.
• Domestic hot water generation.
• Snow-melt installations.
• Radiant heating systems.
• Geothermal heat pumps.
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
• Larger, stainless steel shaft.
• New sealed, permanently lubricated bearings.
• Bellows-style mechanical seal with silicon carbide wear surfaces.
• New water slinger to protect motor against water intrusion.
• Less flanges.
• Bronze-fitted.
• EPDM gasket.
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal.
• 30% Glass-filled Noryl impeller.
• Stainless steel face plate and shaft.
• Can be used with 3/4” to 2” flanges.
• Weights range from 11.5 to 20.1 lbs.
• Permanently lubricated stainless steel bearings.
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt.
• For California Residents please see Prop 65 Warnings
| Manufacture Item Number | 182202-651 |
| UPC | 672807409326 |
| Weight | 16.09 |
| Package Dimensions (in) | 9 x 9 x 6 |
| Package Quantity | EACH |
| A (in) | 8-1/2 |
| B (in) | 6-3/4 |
| C (in) | 3-3/4 |
| Amp | 2.0 |
| H.P. | 1/6 |
| RPM | 3300 |
Details
E.2 Series circulators are designed for use in a wide range of hydronic applications, including:
• Hot & chilled water recirculation.
• Domestic hot water generation.
• Snow-melt installations.
• Radiant heating systems.
• Geothermal heat pumps.
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
• Larger, stainless steel shaft.
• New sealed, permanently lubricated bearings.
• Bellows-style mechanical seal with silicon carbide wear surfaces.
• New water slinger to protect motor against water intrusion.
• Less flanges.
• Bronze-fitted.
• EPDM gasket.
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal.
• 30% Glass-filled Noryl impeller.
• Stainless steel face plate and shaft.
• Can be used with 3/4” to 2” flanges.
• Weights range from 11.5 to 20.1 lbs.
• Permanently lubricated stainless steel bearings.
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt.
• For California Residents please see Prop 65 Warnings
• Hot & chilled water recirculation.
• Domestic hot water generation.
• Snow-melt installations.
• Radiant heating systems.
• Geothermal heat pumps.
E.2 Series circulators have been re-designed to improve durability and provide enhanced protection against leakage and water damage to electrical components. New design elements include:
• Larger, stainless steel shaft.
• New sealed, permanently lubricated bearings.
• Bellows-style mechanical seal with silicon carbide wear surfaces.
• New water slinger to protect motor against water intrusion.
• Less flanges.
• Bronze-fitted.
• EPDM gasket.
• 120 Volts, 60 HZ
• Silicon carbide EnviroSeal.
• 30% Glass-filled Noryl impeller.
• Stainless steel face plate and shaft.
• Can be used with 3/4” to 2” flanges.
• Weights range from 11.5 to 20.1 lbs.
• Permanently lubricated stainless steel bearings.
• All pumps are 2 bolt flanges except for ARPE16, is 4 bolt.
• For California Residents please see Prop 65 Warnings