Taco Single Phase Circulating Pump - 1/25 H.P., 120V, 60 Hz., 1590-4830 RPM, Variable Speed
The Viridian VR1816 circulator is an infinitely variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Operating modes include infinitely variable fixed speed and self-adjusting constant pressure or proportional pressure variable speed.
• Connection type: Flanged
• Flange Code: S
• High-efficiency ECM motor uses up to 85% less electricity.
• Infinitely variable speed settings to fine tune flow for any system
• Six pressure presets to fit the job.
• Sure Start automatic unblocking and air purging mode.
• 18ft. Shut-off head, 16 gpm max flow.
• ECM High-efficiency motor.
• Easy to use dial to set operating speed or pressure control
• 3 operating modes: Fixed speed - infinitely adjustable min/max settings, constant pressure - variable speed - 3 constant pressure differential curves (5, 10, or 15 feet of head), and proportional pressure - variable speed - 3 variable pressure differential curves (High, Med, or Low).
• Multi-color LED display showing operating mode and error code diagnostics.
• Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation.
• Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required.
• Dual electrical knockouts.
• Whisper quiet operation.
• BIO Barrier® protects the pump from system contaminants.
• Integral flow check.
• 6-3/8” Flange to flange.
• Infinitely variable speed.
• Constant pressure variable speed.
• Proportional pressure variable speed.
• High efficiency motor, uses up to 85% less electricity.
• 5 Color LED display shows operating mode and error code diagnostics.
• Simple to use selector dial to change operating mode to match system design.
• 16 GPM at 0’, 15 GPM at 1’, 14.5 gpm AT 2’, 14.5 gpm at 3’, 13.5 GPM at 4’, 13 GPM at 5’, 12 GPM at 6’, 11.5GPM at 7’, 10 GPM at 8”, 8.5 GPM at 10 ‘, 7 GPM at 12’, 6.5 GPM at 15’, 5 GPM at 15’, 4.5gpm at 16’,
• For California Residents please see Prop 65 Warnings
• Connection type: Flanged
• Flange Code: S
• High-efficiency ECM motor uses up to 85% less electricity.
• Infinitely variable speed settings to fine tune flow for any system
• Six pressure presets to fit the job.
• Sure Start automatic unblocking and air purging mode.
• 18ft. Shut-off head, 16 gpm max flow.
• ECM High-efficiency motor.
• Easy to use dial to set operating speed or pressure control
• 3 operating modes: Fixed speed - infinitely adjustable min/max settings, constant pressure - variable speed - 3 constant pressure differential curves (5, 10, or 15 feet of head), and proportional pressure - variable speed - 3 variable pressure differential curves (High, Med, or Low).
• Multi-color LED display showing operating mode and error code diagnostics.
• Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation.
• Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required.
• Dual electrical knockouts.
• Whisper quiet operation.
• BIO Barrier® protects the pump from system contaminants.
• Integral flow check.
• 6-3/8” Flange to flange.
• Infinitely variable speed.
• Constant pressure variable speed.
• Proportional pressure variable speed.
• High efficiency motor, uses up to 85% less electricity.
• 5 Color LED display shows operating mode and error code diagnostics.
• Simple to use selector dial to change operating mode to match system design.
• 16 GPM at 0’, 15 GPM at 1’, 14.5 gpm AT 2’, 14.5 gpm at 3’, 13.5 GPM at 4’, 13 GPM at 5’, 12 GPM at 6’, 11.5GPM at 7’, 10 GPM at 8”, 8.5 GPM at 10 ‘, 7 GPM at 12’, 6.5 GPM at 15’, 5 GPM at 15’, 4.5gpm at 16’,
• For California Residents please see Prop 65 Warnings
| Manufacture Item Number | VR1816-HY1-FC2A00 |
| UPC | 687752341362 |
| Weight | 6 |
| Package Quantity | EACH |
| H.P. | 1/25 |
| Hz | 60 |
| RPM | 1590-4830 |
| Volt | 120 |
| Watt | 4-44 |
Details
The Viridian VR1816 circulator is an infinitely variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Operating modes include infinitely variable fixed speed and self-adjusting constant pressure or proportional pressure variable speed.
• Connection type: Flanged
• Flange Code: S
• High-efficiency ECM motor uses up to 85% less electricity.
• Infinitely variable speed settings to fine tune flow for any system
• Six pressure presets to fit the job.
• Sure Start automatic unblocking and air purging mode.
• 18ft. Shut-off head, 16 gpm max flow.
• ECM High-efficiency motor.
• Easy to use dial to set operating speed or pressure control
• 3 operating modes: Fixed speed - infinitely adjustable min/max settings, constant pressure - variable speed - 3 constant pressure differential curves (5, 10, or 15 feet of head), and proportional pressure - variable speed - 3 variable pressure differential curves (High, Med, or Low).
• Multi-color LED display showing operating mode and error code diagnostics.
• Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation.
• Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required.
• Dual electrical knockouts.
• Whisper quiet operation.
• BIO Barrier® protects the pump from system contaminants.
• Integral flow check.
• 6-3/8” Flange to flange.
• Infinitely variable speed.
• Constant pressure variable speed.
• Proportional pressure variable speed.
• High efficiency motor, uses up to 85% less electricity.
• 5 Color LED display shows operating mode and error code diagnostics.
• Simple to use selector dial to change operating mode to match system design.
• 16 GPM at 0’, 15 GPM at 1’, 14.5 gpm AT 2’, 14.5 gpm at 3’, 13.5 GPM at 4’, 13 GPM at 5’, 12 GPM at 6’, 11.5GPM at 7’, 10 GPM at 8”, 8.5 GPM at 10 ‘, 7 GPM at 12’, 6.5 GPM at 15’, 5 GPM at 15’, 4.5gpm at 16’,
• For California Residents please see Prop 65 Warnings
• Connection type: Flanged
• Flange Code: S
• High-efficiency ECM motor uses up to 85% less electricity.
• Infinitely variable speed settings to fine tune flow for any system
• Six pressure presets to fit the job.
• Sure Start automatic unblocking and air purging mode.
• 18ft. Shut-off head, 16 gpm max flow.
• ECM High-efficiency motor.
• Easy to use dial to set operating speed or pressure control
• 3 operating modes: Fixed speed - infinitely adjustable min/max settings, constant pressure - variable speed - 3 constant pressure differential curves (5, 10, or 15 feet of head), and proportional pressure - variable speed - 3 variable pressure differential curves (High, Med, or Low).
• Multi-color LED display showing operating mode and error code diagnostics.
• Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation.
• Integral Flow Check (IFC) is included in carton. Simply press into discharge flange if required.
• Dual electrical knockouts.
• Whisper quiet operation.
• BIO Barrier® protects the pump from system contaminants.
• Integral flow check.
• 6-3/8” Flange to flange.
• Infinitely variable speed.
• Constant pressure variable speed.
• Proportional pressure variable speed.
• High efficiency motor, uses up to 85% less electricity.
• 5 Color LED display shows operating mode and error code diagnostics.
• Simple to use selector dial to change operating mode to match system design.
• 16 GPM at 0’, 15 GPM at 1’, 14.5 gpm AT 2’, 14.5 gpm at 3’, 13.5 GPM at 4’, 13 GPM at 5’, 12 GPM at 6’, 11.5GPM at 7’, 10 GPM at 8”, 8.5 GPM at 10 ‘, 7 GPM at 12’, 6.5 GPM at 15’, 5 GPM at 15’, 4.5gpm at 16’,
• For California Residents please see Prop 65 Warnings